- EAST - Static variable in class PamView.CornerLayoutContraint
-
- EchoController - Class in echoDetector
-
This class is a very basic broadband echo detector.
- EchoController(String) - Constructor for class echoDetector.EchoController
-
- EchoDataUnit - Class in echoDetector
-
This data unit is for measuring multipath echo delay
It requires raw acoustic data and can provide an estimate
of the multipath delay computed via cepstral analysis.
- EchoDataUnit(long, float, double[], int, int) - Constructor for class echoDetector.EchoDataUnit
-
- EchoDetectionSystem - Class in clickDetector.echoDetection
-
An echo detection system can provide everything there that is needed to decide whether clicks
are echoes or not.
- EchoDetectionSystem(ClickControl) - Constructor for class clickDetector.echoDetection.EchoDetectionSystem
-
- EchoDetectionTask - Class in clickDetector.offlineFuncs
-
- EchoDetectionTask(ClickControl) - Constructor for class clickDetector.offlineFuncs.EchoDetectionTask
-
- echoDetector - package echoDetector
-
- EchoDetector - Interface in clickDetector.echoDetection
-
Interface to classes which do the actual work of detecting echoes.
- EchoDialog - Class in clickDetector.echoDetection
-
- EchoDialogPanel - Interface in clickDetector.echoDetection
-
- EchoParametersDialog - Class in echoDetector
-
Allows user to change echo detector parameters.
- EchoProcess - Class in echoDetector
-
This class subscribes to ClickDetection data blocks and processes the
raw data in those blocks.
- EchoProcess(EchoController) - Constructor for class echoDetector.EchoProcess
-
- EchoProcessParameters - Class in echoDetector
-
This class stores the parameters for the echo detector.
- EchoProcessParameters() - Constructor for class echoDetector.EchoProcessParameters
-
- EdgeControl - Class in EdgeDetector
-
Edge detector control
- EdgeControl(String) - Constructor for class EdgeDetector.EdgeControl
-
- EdgeDetector - package EdgeDetector
-
- EdgeParameters - Class in EdgeDetector
-
- EdgeParameters() - Constructor for class EdgeDetector.EdgeParameters
-
- EdgeParamsDialog - Class in EdgeDetector
-
- EdgeProcess - Class in EdgeDetector
-
- EdgeProcess(PamControlledUnit) - Constructor for class EdgeDetector.EdgeProcess
-
- editButton() - Method in class clickDetector.ClickClassifiers.basic.BasicIdentifierPanel
-
- editButton() - Method in class clickDetector.ClickClassifiers.basicSweep.SweepClassifierPanel
-
- editButton() - Method in class clickDetector.ClickClassifiers.UserTypesPanel
-
- EditControlPanel - Class in loggerForms.formdesign
-
Left hand side of the dialog which displays all the components which can be
added / removed.
- EditControlPanel(FormEditDialog, FormDescription) - Constructor for class loggerForms.formdesign.EditControlPanel
-
- EditDataForm - Static variable in class loggerForms.LoggerForm
-
- editElement() - Method in class Array.HydrophoneDialogPanel
-
- editForm(Window) - Method in class loggerForms.FormDescription
-
Edit the form.
- editingCanceled(ChangeEvent) - Method in class likelihoodDetectionModule.TreeTable.DoubleCellEditorListener
-
- editingStopped(ChangeEvent) - Method in class likelihoodDetectionModule.TreeTable.DoubleCellEditorListener
-
- editLookupTopic(Window, String) - Method in class generalDatabase.lookupTables.LookUpTables
-
Query all LUT items with the given topic name.
- EditOfflineEventDialog - Class in clickDetector.offlineFuncs
-
- editOptions(Window) - Method in class clickDetector.tdPlots.ClickPlotInfo
-
- editOptions(Window) - Method in class dataPlots.data.TDDataInfo
-
Edit options - generally involves throwing up a
dialog of some sort.
- editOptions(Window) - Method in class decimus.summarystring.plots.DstrPlotInfo
-
- editOptions(Window) - Method in class fftManager.newSpectrogram.SpectrogramPlotInfo
-
- EditPropertyPanel - Class in loggerForms.formdesign
-
- EditPropertyPanel(FormEditDialog, FormDescription) - Constructor for class loggerForms.formdesign.EditPropertyPanel
-
- editSpeciesList() - Method in class difar.display.DifarClipDecorations
-
Edit the species list from the drop down menu.
- editSpeciesList() - Method in class difar.display.DifarClipDecorationsOld1575
-
Edit the species list from the drop down menu.
- EditVesselBuoySettings - Static variable in class difar.DIFARMessage
-
edit params box, this may have things like time to calibrate
- elapsedMillis - Variable in class difar.DemuxWorkerMessage
-
- EmBuoyStatus - Class in networkTransfer.emulator
-
- EmBuoyStatus(int, LatLong) - Constructor for class networkTransfer.emulator.EmBuoyStatus
-
- emptyBorderBottom - Static variable in class PamView.PamGridBagContraints
-
- emptyBorderLeft - Static variable in class PamView.PamGridBagContraints
-
- emptyBorderRight - Static variable in class PamView.PamGridBagContraints
-
- emptyBorderTop - Static variable in class PamView.PamGridBagContraints
-
- EmptyLocatorSettings - Class in Array
-
- EmptyLocatorSettings(Class) - Constructor for class Array.EmptyLocatorSettings
-
- EmptyTableDefinition - Class in generalDatabase
-
A totally empty table definition.
- EmptyTableDefinition(String) - Constructor for class generalDatabase.EmptyTableDefinition
-
- EmulatedData - Class in nmeaEmulator
-
Class to hold new emulated data
- EmulatedData(long, long, String) - Constructor for class nmeaEmulator.EmulatedData
-
- EmulateDialog - Class in networkTransfer.emulator
-
- EmulateDialog(NetworkEmulator, Window) - Constructor for class networkTransfer.emulator.EmulateDialog
-
- EmulationProgress - Class in nmeaEmulator
-
- EmulationProgress() - Constructor for class nmeaEmulator.EmulationProgress
-
- EmulationProgress(String) - Constructor for class nmeaEmulator.EmulationProgress
-
- EmulationProgress(long, long, int) - Constructor for class nmeaEmulator.EmulationProgress
-
- EmulatorParams - Class in networkTransfer.emulator
-
- EmulatorParams() - Constructor for class networkTransfer.emulator.EmulatorParams
-
- EmulatorStream - Class in networkTransfer.emulator
-
Handles generation of a single buoy emulation.
- EmulatorStream(NetworkEmulator, int, LatLong) - Constructor for class networkTransfer.emulator.EmulatorStream
-
- enable - Variable in class Acquisition.offlineFuncs.OfflineFileParameters
-
Enable offline file access
- enable - Variable in class clickDetector.ClickClassifiers.basicSweep.SweepClassifierSet
-
- enable - Variable in class difar.DifarParameters.DifarTriggerParams
-
Enabled
- ENABLE_CLICKLENGTH - Static variable in class clickDetector.ClickTypeParams
-
- ENABLE_ENERGYBAND - Static variable in class clickDetector.ClickTypeParams
-
- ENABLE_MEANFREQUENCY - Static variable in class clickDetector.ClickTypeParams
-
- ENABLE_PEAKFREQPOS - Static variable in class clickDetector.ClickTypeParams
-
- ENABLE_PEAKFREQWIDTH - Static variable in class clickDetector.ClickTypeParams
-
- enableAll(boolean) - Method in class whistleClassifier.ClassifierInfoArea
-
- enableButtons() - Method in class dataPlots.layout.TDGraphHidingDialog
-
- enableClustering - Variable in class staticLocaliser.StaticLocaliserParams
-
Enable clustering of an unsynchronised systems.
- enableComponents(boolean, Component) - Static method in class staticLocaliser.panels.AbstractLocaliserControl
-
Enable or disable ALL components within the main JPanel.
- enableControls() - Method in class AIS.AISSettingsDialog
-
- enableControls() - Method in class beakedWhaleProtocol.BeakedSidePanel
-
- enableControls() - Method in class binaryFileStorage.BinaryStorageDialogPanel
-
- enableControls() - Method in class clickDetector.dialogs.WaveDisplayDialog
-
- enableControls(boolean) - Method in class clickDetector.offlineFuncs.DatabaseCheckDialog
-
- enableControls() - Method in class clipgenerator.ClipDialog
-
- enableControls() - Method in class clipgenerator.ClipGenSettingDialog
-
- enableControls() - Method in class difar.display.DIFARUnitControlPanel
-
- enableControls() - Method in class hfDaqCard.SmruDaqDialogPanel
-
- enableControls() - Method in class loggerForms.LoggerForm
-
Enable / disable buttons
- enableControls() - Method in class Map.MapParametersDialog
-
- enableControls() - Method in class NMEA.NMEAParametersDialog
-
- enableControls() - Method in class noiseMonitor.NoiseDisplayDialog
-
- enableControls(boolean) - Method in class PamUtils.LatLongEditableDialogStrip
-
- enableControls() - Method in class spectrogramNoiseReduction.SpectrogramNoiseDialogPanel
-
- enableControls() - Method in class staticLocaliser.panels.LocAlgorithmControl
-
Cycle through algorithms and enable/disable settings button.
- enableControls() - Method in class targetMotionModule.panels.EventControlPanel
-
- enableControls() - Method in class targetMotionModule.panels.MapPanel2D
-
- enableControls() - Method in class targetMotionModule.panels.MapPanel3D
-
- enableControls() - Method in class targetMotionModule.panels.ModelControlPanel
-
- enableControls() - Method in class targetMotionModule.panels.ModelResultPanel
-
- enableControls() - Method in class targetMotionModule.panels.TargetMotionMainPanel
-
- enableControls() - Method in interface targetMotionModule.panels.TMDialogComponent
-
Enable controls - based on event selection and other controls
- enableControls() - Method in class targetMotionOld.dialog.DialogMap2D
-
- enableControls() - Method in class targetMotionOld.dialog.DialogMap3D
-
- enableControls() - Method in class targetMotionOld.dialog.EventControlPanel
-
- enableControls() - Method in class targetMotionOld.dialog.ModelControlPanel
-
- enableControls() - Method in class targetMotionOld.dialog.ModelResultPanel
-
- enableControls() - Method in class targetMotionOld.dialog.TargetMotionDialog
-
- enableControls() - Method in interface targetMotionOld.dialog.TMDialogComponent
-
Enable controls - based on event selection and other controls
- enableControls() - Method in class videoRangePanel.panels.VRTabPanelControl
-
- enableControls() - Method in class videoRangePanel.vrmethods.AbstractVRMethod
-
- enableEnergyBands - Variable in class clickDetector.ClickClassifiers.basicSweep.SweepClassifierSet
-
- enableFFTFilter - Variable in class clickDetector.ClickClassifiers.basicSweep.SweepClassifierSet
-
- enableFlipButtons() - Method in class rocca.RoccaSidePanel.SidePanel
-
enable/disable the sighting scroll buttons, depending on where we
are in the sighting list
- enableGroupBoxes() - Method in class PamView.GroupedSourcePanel
-
- enableGUIControl(boolean) - Method in class PamController.PamController
-
Enables / Disables GUI for input.
- enableGUIControl(boolean) - Method in class PamView.GuiFrameManager
-
- enableGUIControl(boolean) - Method in class PamView.PamGui
-
- enableGUIControl(boolean) - Method in class PamView.PamObjectViewer
-
- enableGUIControl(boolean) - Method in interface PamView.PamViewInterface
-
- enableHelpButton(boolean) - Method in class PamView.PamDialog
-
- enableItems(boolean) - Method in class PamView.MenuItemEnabler
-
Enable all menu items in a MenuItemEnabler list
- enableLength - Variable in class clickDetector.ClickClassifiers.basicSweep.SweepClassifierSet
-
- enableMasterDevice() - Method in class nidaqdev.NIDAQProcess
-
- enableMultiBoard - Variable in class nidaqdev.NIDaqParams
-
- enablePanel(boolean) - Method in class staticLocaliser.panels.LocAlgorithmControl
-
- enablePanel() - Method in class videoRangePanel.panels.VRSidePanel
-
- enablePicking(Node) - Static method in class PamGraph3D.Pam3DUtils
-
Enables branchgroup picking of Shape3D's.
- enableRecording() - Method in class SoundRecorder.RecorderControl
-
Enables and disables the main control buttons for starting / stopping
depending on whether or not the ADC is running.
- enableRecording(boolean) - Method in class SoundRecorder.RecorderSidePanel
-
- enableRecording(boolean) - Method in class SoundRecorder.RecorderTabPanel
-
- enableRecording(boolean) - Method in interface SoundRecorder.RecorderView
-
- enableRecordingControl(boolean) - Method in class SoundRecorder.RecorderControl
-
Enables and disables controls on the views such as the channel selection
buttons, the main settings button and also the menus..
- enableRecordingControl(boolean) - Method in class SoundRecorder.RecorderSidePanel
-
- enableRecordingControl(boolean) - Method in class SoundRecorder.RecorderTabPanel
-
- enableRecordingControl(boolean) - Method in interface SoundRecorder.RecorderView
-
- enableStartButton(boolean) - Static method in class PamView.TopToolBar
-
Enable all start buttons in all top menu bars.
- enableStopButton(boolean) - Static method in class PamView.TopToolBar
-
Enable all stop buttons in all top menu bars.
- enableTheCorrectSource() - Method in class rocca.RoccaParametersDialog
-
Enables/disables the FFT, Click Detector and Whistle&Moan sources based on the value found
in the current roccaParameters object
2014/10/13 allow multiple sources.
- enableZeroCrossings - Variable in class clickDetector.ClickClassifiers.basicSweep.SweepClassifierSet
-
- END_CRASHED - Static variable in class binaryFileStorage.BinaryFooter
-
- END_FILETOOBIG - Static variable in class binaryFileStorage.BinaryFooter
-
- END_FILETOOLONG - Static variable in class binaryFileStorage.BinaryFooter
-
- END_RUNSTOPPED - Static variable in class binaryFileStorage.BinaryFooter
-
- END_UNKNOWN - Static variable in class binaryFileStorage.BinaryFooter
-
- endDecimation - Variable in class noiseBandMonitor.NoiseBandSettings
-
- endDetection(DetectionKey) - Method in interface likelihoodDetectionModule.thresholdDetector.FilteredConsumer
-
This method is called to end an existing detection
pre-condition: startDetection has been previously called with the same channelMask/band.
- endDetection(DetectionKey) - Method in class likelihoodDetectionModule.thresholdDetector.FilteredDetectionWriter
-
- endDetection(DetectionKey) - Method in class likelihoodDetectionModule.thresholdDetector.TestConsumer
-
- endEvent(long, PamDataUnit) - Method in interface eventCounter.EventCounterMonitor
-
- endFreq - Variable in class clickDetector.ClickClassifiers.basicSweep.ZeroCrossingStats
-
Zero crossing end frequency from fit
- endFreq - Variable in class RightWhaleEdgeDetector.RWEParameters
-
- endFrequencyHz - Variable in class likelihoodDetectionModule.GuardBand
-
The end frequency hz.
- endFrequencyHz - Variable in class likelihoodDetectionModule.SignalBand
-
The end frequency hz.
- endRedoDataTime - Variable in class offlineProcessing.TaskGroupParams
-
used in PROCESS_SPECIFICPERIOD mode-will not affect PROCESS_NEW and lastDataTime
boolean could be used to govern this in future
- endTimeArrow - Variable in class dataMap.DataStreamPanel
-
- endTimeMillis - Variable in class SoundRecorder.RecordingInfo
-
- endTimeMillis - Variable in class whistleDetector.EventDataUnit
-
- EnergySumControl - Class in IshmaelDetector
-
- EnergySumControl(String) - Constructor for class IshmaelDetector.EnergySumControl
-
- EnergySumParams - Class in IshmaelDetector
-
- EnergySumParams() - Constructor for class IshmaelDetector.EnergySumParams
-
- EnergySumParamsDialog - Class in IshmaelDetector
-
- EnergySumProcess - Class in IshmaelDetector
-
- EnergySumProcess(EnergySumControl, PamDataBlock) - Constructor for class IshmaelDetector.EnergySumProcess
-
- energyThresholds - Variable in class clickDetector.ClickClassifiers.basicSweep.SweepClassifierSet
-
- enterAction() - Method in class PamView.PopupTextField
-
- enterLatLong - Static variable in class beakedWhaleProtocol.BeakedLocationData
-
- envelopeBearings - Variable in class Localiser.DelayMeasurementParams
-
Measure bearings from the waveform envelope, not the full wavefrom.
- EnvelopeControl - Class in envelopeTracer
-
- EnvelopeControl(String) - Constructor for class envelopeTracer.EnvelopeControl
-
- EnvelopeDialog - Class in envelopeTracer
-
- EnvelopeParams - Class in envelopeTracer
-
- EnvelopeParams() - Constructor for class envelopeTracer.EnvelopeParams
-
- EnvelopeProcess - Class in envelopeTracer
-
- EnvelopeProcess(EnvelopeControl) - Constructor for class envelopeTracer.EnvelopeProcess
-
- envelopeSettings(Frame) - Method in class envelopeTracer.EnvelopeControl
-
- envelopeTracer - package envelopeTracer
-
- EnvironmentPanel - Class in Array
-
- equals(Streamer) - Method in class Array.Streamer
-
Check if two streamers have identical values for all parameters
- equals(Object) - Method in class dataMap.OfflineDataMapPoint
-
- equals(Object) - Method in class fftFilter.FFTFilterParams
-
- equals(FilterParams) - Method in class Filters.FilterParams
-
- equals(Object) - Method in class likelihoodDetectionModule.LikelihoodFFTParameters
-
- equals(Object) - Method in class likelihoodDetectionModule.thresholdDetector.DetectionKey
-
equals operator.
- equals(PamViewParameters) - Method in class PamController.PamViewParameters
-
- equals(PamVector) - Method in class pamMaths.PamVector
-
- equals(PamModelSettings) - Method in class PamModel.PamModelSettings
-
- equals(LatLong) - Method in class PamUtils.LatLong
-
- ERROR_LOADING_CSV - Static variable in class Array.importHydrophoneData.HydrophoneImport
-
Something has gone wrong getting the csv file
- ERROR_LOADING_MATLAB_STRUCT - Static variable in class Array.importHydrophoneData.HydrophoneImport
-
Something has gone wrong loading the matlab structure
- ERROR_NUMBER_OF_HYDROPHONES_ARRAY - Static variable in class Array.importHydrophoneData.HydrophoneImport
-
The number of hydrophones is not the same as the number of hydrophones in the curretn array manager.
- ERROR_NUMBER_OF_HYDROPHONES_INCONSISTANT - Static variable in class Array.importHydrophoneData.HydrophoneImport
-
The number of hydrophones is different for different times.
- ERROR_OPTION - Static variable in class PamView.JFontChooser
-
Return value from showDialog()
.
- ERROR_YEARS - Static variable in class Array.importHydrophoneData.HydrophoneImport
-
The data is far in the past or in the future
- errors - Variable in class Localiser.timeDelayLocalisers.MCMCTDResults
-
- errorTextLength - Static variable in class Array.StreamerDialog
-
- estimateTrackedGroup(DifarDataUnit) - Method in class difar.DifarProcess
-
Match the selected bearing to the nearest mean-bearing to a group, and
Make sure that the matching group is highlighted in the groups panel.
- ETA - Static variable in class whistleClassifier.training.BatchTrainingProgress
-
- etaDay - Variable in class AIS.AISStaticData
-
- etaHour - Variable in class AIS.AISStaticData
-
- etaMilliseconds - Variable in class AIS.AISStaticData
-
- etaMinute - Variable in class AIS.AISStaticData
-
- etaMonth - Variable in class AIS.AISStaticData
-
- EventControlPanel - Class in targetMotionModule.panels
-
- EventControlPanel(TargetMotionControl) - Constructor for class targetMotionModule.panels.EventControlPanel
-
- EventControlPanel<T extends PamDetection> - Class in targetMotionOld.dialog
-
Reinstated Target motion add-in as used by the click detector.
- EventControlPanel(TargetMotionLocaliser<T>, TargetMotionDialog<T>) - Constructor for class targetMotionOld.dialog.EventControlPanel
-
- EventControlPanel.PopMenuLocalise - Class in targetMotionModule.panels
-
- EventControlPanel.PopMenuLocalise(ClickDetection) - Constructor for class targetMotionModule.panels.EventControlPanel.PopMenuLocalise
-
- eventCounter - package eventCounter
-
- EventCounterMonitor - Interface in eventCounter
-
- EventCounterSidePanel - Class in eventCounter
-
- EventCounterSidePanel(DataCounter) - Constructor for class eventCounter.EventCounterSidePanel
-
- EventDataUnit - Class in whistleDetector
-
- eventIndex - Variable in class targetMotionModule.EventLocalisationProgress
-
Deprecated.
- eventIndex - Variable in class targetMotionOld.EventLocalisationProgress
-
- eventIntegrationTime - Variable in class whistleDetector.WhistleParameters
-
- EventListDialog - Class in clickDetector.offlineFuncs
-
- EventLocalisationProgress - Class in targetMotionModule
-
Deprecated.
- EventLocalisationProgress(int, int) - Constructor for class targetMotionModule.EventLocalisationProgress
-
Deprecated.
- EventLocalisationProgress - Class in targetMotionOld
-
Reinstated Target motion add-in as used by the click detector.
- EventLocalisationProgress(int, int) - Constructor for class targetMotionOld.EventLocalisationProgress
-
- eventLocaliserWorker - Variable in class staticLocaliser.StaticLocalise
-
- eventMaxGapTime - Variable in class whistleDetector.WhistleParameters
-
- eventMinWhistleCount - Variable in class whistleDetector.WhistleParameters
-
- EventRotator - Class in targetMotionModule
-
Class to rotate and transform an event so that it's track lies as close
as possible to the x axis.
- EventRotator(ArrayList<PamDetection>, PamDataBlock) - Constructor for class targetMotionModule.EventRotator
-
- eventRotator - Variable in class targetMotionOld.AbstractTimeDelayLocaliser
-
- EventRotator - Class in targetMotionOld
-
Reinstated class to rotate and transform an event so that it's track lies as close
as possible to the x axis.
- EventRotator(PamDetection) - Constructor for class targetMotionOld.EventRotator
-
- events() - Method in class likelihoodDetectionModule.thresholdDetector.TestConsumer
-
- excelSerialtoMillis(double) - Static method in class PamUtils.PamCalendar
-
Converts excel Serial date number (Jan 1900 format) to millis.
- excludeColumn(String) - Method in class generalDatabase.dataExport.DataExportDialog
-
Remove a specific column from the visible table item list.
- excludeColumn(PamTableItem) - Method in class generalDatabase.dataExport.DataExportDialog
-
Removes a specific table item from the visible list.
- excludeDataBlock(PamDataBlock, boolean) - Method in class PamView.SourcePanel
-
Exclude specific data blocks from the source list.
- execute() - Method in class PamController.command.ExitCommand
-
- execute() - Method in class PamController.command.ExtCommand
-
Execute the command
- execute() - Method in class PamController.command.KillCommand
-
- execute() - Method in class PamController.command.PingCommand
-
- execute() - Method in class PamController.command.StartCommand
-
- execute() - Method in class PamController.command.StatusCommand
-
- execute() - Method in class PamController.command.StopCommand
-
- execute() - Method in class PamController.command.SummaryCommand
-
- executeCommand() - Method in class PamController.command.ExtCommand
-
Execute the command.
- executeTMThread(ArrayList<PamDetection>, TargetMotionLocaliserProvider, boolean) - Method in class targetMotionModule.TMManager
-
- exePath - Variable in class difar.demux.GreenridgeParams
-
- ExitCommand - Class in PamController.command
-
Exits PAMGuard.
- ExitCommand() - Constructor for class PamController.command.ExitCommand
-
- ExponentialAverager - Class in likelihoodDetectionModule.normalizer
-
This is a simple exponential (decaying) average.
- export(ArrayList<TargetConfiguration>) - Method in class likelihoodDetectionModule.TargetConfigurationExporter
-
Export a bunch of target configurations at once.
- exportCSVFile(String) - Static method in class videoRangePanel.LandMrkGrpCSVLogging
-
- ExportDelaysDialog - Class in staticLocaliser.panels
-
- ExportDelaysDialog(Window, Point) - Constructor for class staticLocaliser.panels.ExportDelaysDialog
-
- exportEventData(Frame) - Method in class clickDetector.offlineFuncs.ClicksOffline
-
- exportLocToCSV - Variable in class staticLocaliser.StaticLocaliserParams
-
Set to true to also export localisation results to .csv files.
- exportMatchToCSV - Variable in class staticLocaliser.StaticLocaliserParams
-
Set to true to export detection match maps for each localisation result to .csv files.
- exportSettings(JFrame) - Method in class PamController.PamSettingManager
-
- exportXMLSettings() - Method in class PamController.PamController
-
Export certain settings into an XML file
which will have the current date encoded in its
name.
- ExtCommand - Class in PamController.command
-
- ExtCommand(String, boolean) - Constructor for class PamController.command.ExtCommand
-
- extendAllocation() - Method in class RightWhaleEdgeDetector.RWESound
-
Add one more bin to everything in the sound
- extendRegion(SliceData, int) - Method in class whistlesAndMoans.ConnectedRegion
-
Extend a region during fragmentation taking a single peak from a new slice.
- EXTERNAL_DATA_IMPORTED - Static variable in interface PamController.PamControllerInterface
-
Called whenever external data is imported into PAMGUARD and saved into the database and/or binary store.
- external_wav - Static variable in class PamController.PamSettingManager
-
- extractFileFromJarRoot(String) - Method in class PamUtils.JarExtractor
-
- extractSQLLoggingFields(StreamerDataUnit) - Method in class Array.streamerOrigin.HydrophoneOriginSystem
-
Extract data from SQL logging fields and add them back into the streamer data
- extractSQLLoggingFields(StreamerDataUnit) - Method in class Array.streamerOrigin.StaticOriginSystem
-
- extractXMLElementData(Element, String) - Method in class loggerForms.controlDescriptions.CdChar
-
- extractXMLElementData(Element, String) - Method in class loggerForms.controlDescriptions.CdCheckbox
-
- extractXMLElementData(Element, String) - Method in class loggerForms.controlDescriptions.CdCounter
-
- extractXMLElementData(Element, String) - Method in class loggerForms.controlDescriptions.CdDouble
-
- extractXMLElementData(Element, String) - Method in class loggerForms.controlDescriptions.CdInteger
-
- extractXMLElementData(Element, String) - Method in class loggerForms.controlDescriptions.CdLatLong
-
- extractXMLElementData(Element, String) - Method in class loggerForms.controlDescriptions.CdLatLongTime
-
- extractXMLElementData(Element, String) - Method in class loggerForms.controlDescriptions.CdLookup
-
- extractXMLElementData(Element, String) - Method in class loggerForms.controlDescriptions.CdNMEAChar
-
- extractXMLElementData(Element, String) - Method in class loggerForms.controlDescriptions.CdNMEAFloat
-
- extractXMLElementData(Element, String) - Method in class loggerForms.controlDescriptions.CdNMEAInt
-
- extractXMLElementData(Element, String) - Method in class loggerForms.controlDescriptions.CdShort
-
- extractXMLElementData(Element, String) - Method in class loggerForms.controlDescriptions.CdSingle
-
- extractXMLElementData(Element, String) - Method in class loggerForms.controlDescriptions.CdSubForm
-
- extractXMLElementData(Element, String) - Method in class loggerForms.controlDescriptions.CdTime
-
- extractXMLElementData(Element, String) - Method in class loggerForms.controlDescriptions.CdTimestamp
-
- extractXMLElementData(Element, String) - Method in class loggerForms.controlDescriptions.ControlDescription
-
Extract data values from an XML Element.
- extraPainting(Graphics) - Method in class PamView.hidingpanel.HidingPanel
-
Extra painting to highlight panel if mouse is inside.